IndoVape | Personal Vaporizers

BomberWire

Bombertech

Sold out.

Click here to be notified by email when BomberWire becomes available.



Bomber Wire A-1 Kanthal Coil for RBA

This is an excellent quality spooled wire for Rebuildable Atomizers produced in a high quality, clean factory environment. Kanthal A-1 wire is known to be the prefered type of heating wire for vaporizing e-liquid in rebuildable atomizers. Kanthal wire is the most widely used heating wire by the advanced vaping community when wrapping rebuildable coils. Build your own rebuildable atomizer using Bomber Kanthal Wire today!


Comes in 30ft/10m spool

Kanthal Wire Gauge Description :

22AWG
Ultimate for Cloud Chasing, 5-7 wraps(dual coils) will produce 0.01-0.2ohms, it gives you ultimate vapor production but maybe a slight loss the sweetness of the flavors (depending on the type of liquid you use). Designed for RDA/dripper attys only.
5-7 wraps on a 2mm diameter will produce approx 0.01-0.2 ohms. With this kind of resistance, you will have to use a mechanical mod or DNA40.

24AWG
Best for Cloud Chasing, 5-7 wraps(dual coils) will produce 0.1-0.3ohms, it gives you the ultimate vapor production but never lose the sweetness of the flavors. Designed for RDA/dripper attys only.
5-7 wraps on a 2mm diameter will produce approx 0.2-0.6 ohms.

26AWG
Best for medium to Cloud Chasing, suitable for drippers RDA. Ultimate full flavor with mass cloud production.
5-7 wraps on a 2mm diameter will produce around 0.5-0.9 ohms. Best to be used with DNA30/40 and mechanical mods.

28AWG
Best for all types of vaping attys, RDA and RBA, wrapped at 7-9 wraps is best for 15W devices, such as Provaris and DNA30/40 devices.
5-7 wraps on a 2mm diameter will produce around 0.8-1.2 ohms.


BomberWire Pure Nickel Ni200 for Temperature Control enabled Devices

These Pure Nickel Ni200 wires are designed for devices which has a built in Temperature Sensing control chip such as the Evolve DNA40. Another step in the vaping world, this ensures that you will never get a dry hit on your atomizer ever again.
Comes in 30ft/10m spools.

NOTE : Pure Nickel is only for Temperature Control Devices, not for Mechanical Mods, please consult with us if you are unsure of the type of device you have.


BomberWire Twisted Kanthal

This is an excellent quality pre twisted wire available at your convenience. Build your own wire pre-packed ready to go. Using the best quality Kanthal A-1 wire available in the market, these twisted kanthals are best to create more vapor at the minimal space you have.
Comes in 15ft/5m spools.

BomberWire BomberTools Kanthal Ni200 Nickel Wire Clapton


BomberWire by BomberTech™

Vape on...